鑄造的品種和特色 當溫度超越300-400℃(鋼的藍脆區)，到達700-800℃時，變鑄造對金屬坯料(不含板材)施加外力，使其發生塑性變形、改動尺度、形狀及改進功能,用以制作機械零件、工件、工具或毛坯的成形加工辦法。 鑄造的品種和特色 當溫度超越300-400℃(鋼的藍脆區)，到達700-800℃時，變形阻力將急劇減小，變形才能也得到很大改進。依據在不一樣的溫度區域進行的鑄造，對于鍛件質量和鑄造技術需求的不一樣，可分為冷鍛、溫鍛、熱鍛三個成型溫度區域。本來這種溫度區域的區分并無嚴厲的邊界，通常地講，在有再結晶的溫度區域的鑄造叫熱鍛，不加熱在室溫下的鑄造叫冷鍛。

　　在低溫鑄造時，山東鍛件加工的尺度變化很小。在700℃以下鑄造，氧化皮形成少，并且表面無脫碳表象。因而，只需變形能在成形能范圍內，冷鍛簡單得到極好的尺度精度和表面光潔度。只需控制好溫度和光滑冷卻，700℃以下的溫鍛也可以獲得極好的精度。熱鍛時，因?yàn)樽冃文芎妥冃巫枇Χ己苄。梢澡T造形狀復雜的大鍛件。要得到高尺度精度的鍛件，可在900-1000℃溫度域內用熱鍛加工。別的，要注意改進熱鍛的工作環境。鍛模壽數(熱鍛2-5千個，溫鍛1-2萬個，冷鍛2-5萬個)與其它溫度域的鑄造比較是較短的，但它的自由度大，成本低。

　　坯料在冷鍛時要發生變形和加工硬化，使鍛模接受高的荷載，因而，需求運用高強度的鍛模和采用避免磨損和粘結的硬質光滑膜處理辦法。別的，為避免坯料裂紋，需求時進行中心退火以保證需求的變形才能。為保持杰出的光滑狀況，可對坯料進行磷化處理。在用棒料和盤條進行連續加工時，當前對斷面還不能作光滑處理，正在研究運用磷化光滑辦法的可能。

　　濟南泉西重型鍛造有限公司18764458888成立于1996年是濟南較大的鍛件生產廠家之一,主營鍛造,鍛造加工,鍛件廠.主要生產各種模具鋼、工具鋼高速鋼、普碳鋼坯及來料加工,最大單件生產量可達25噸.

　　中譯英：When the temperature exceeds 300-400 degrees C (the blue and brittle zone of steel) and reaches 700-800 degrees C, the casting can make plastic deformation, change the scale, shape and improve function to make the forming process of mechanical parts, workpieces, tools or blanks. When the temperature exceeds 300-400 C (the blue and brittle zone of steel), the deformation resistance will be reduced sharply and the deformation can be greatly improved. According to the different temperature areas, the casting can be divided into three forming temperature regions, such as cold forging, warm forging and hot forging, for the difference between the quality of the forging and the demand of the casting technology. There is no strict boundary between this region of temperature. Generally speaking, the casting is called hot forging in the region of recrystallized temperature, and the casting that is not heated at room temperature is called cold forging.

　　In cryogenic casting, the dimension of forging is very small. Less than 700 degrees C, the oxide scale is less, and the surface has no decarburization. Therefore, only the deformation energy can be obtained in the forming energy range, and cold forging can achieve excellent scale accuracy and surface finish. We only need to control temperature and smooth cooling, and warm forging below 700 degrees can achieve excellent accuracy. When hot forging, because deformation energy and deformation resistance are very small, it can cast large forgings with complex shape. To obtain high precision forgings, hot forging can be done in the 900-1000 temperature range. In addition, we should pay attention to improving the working environment of hot forging. The number of forging dies (hot forging 2-5 thousand, warm forging 1-2 million, cold forging 2-5 million) is shorter than other casting in other temperature fields, but the degree of freedom is large and the cost is low.

　　When the blank should be deformed and hardened during cold forging to make the forging die accept high load, it is necessary to use high strength forging die and use hard smooth film treatment to avoid wear and bond. In addition, in order to avoid billet cracks, center annealing is needed to ensure the deformation of demand. In order to maintain excellent smoothness, billet can be phosphating. During continuous processing with rod and wire rod, the section can not be smoothed at present. The possibility of applying phosphating smoothing method is being studied.

　　Ji'nan Spring Heavy Forging Co., Ltd. 18764458888 was established in 1996 as one of the largest manufacturers of forgings in Ji'nan. The main forging, forging, forging and forging factories mainly produce all kinds of die steel, tool steel high speed steel, universal carbon billet and material processing, the maximum single piece production can reach 25 tons.